Gearbox mount fettle

20 minutes with the hacksaw and the gearbox mount is ready to be lined up and drilled:

I'm just not sure yet if the fore/aft positioning is critical, i.e. I can potentially drill & fit it 20mm nearer/further from the front of the car -  which will be dictated by the propshaft length etc - I need a combination of measure/offer gearbox & prop & ask GBS I think.

Checked with Richard @ GBS - provided the mount is central in the chassis hole it will be fine - no need to mount/offer up gearbox to check.

Finally fitted it to the chassis here: Gearbox mount