I bought some neoprene self adhesive tape for around the bonnet; The idea being to take up any slack & foam to metal joint rather than metal to metal:
Nose trim - I'm not sure if this is completely necessary for IVA; i.e. its unlikely the tester can actually get the 65mm spehere on this edge; however for the sake of 10 minutes I installed the trim:
Detail on my nose mounting; my nose seemed to fit best inside the chassis tube 'A' brackets, so rather than install rivnuts I went for large washers etiher side and a nyloc on the inside:
This is the first time all the indicator circuits have been fitted: rear, front + repeaters & let me check the indicator flash speed is correct.