Thursday, 7 June 2012

Nearside tunnel panels & crescents

Passenger side tunnels just fitted and drilled, held in place with Clecos for now. The front footwell panel has to go in before the brake line is fixed to it, but probably after the gearbox is in and filled with oil.

I've still not completely decided on the order - so just fitted but not fixed for now.

Tunnel fitted & drilled; this panel just needed about 5mm nibbled off the top edge on both sides. These two panels will be fixed once the prop shaft is bolted to the diff.

I also have both inside crescent panels riveted and bonded in place:

No comments :

Post a Comment