Low pressure fuel lines to swirl pot

Quick job to connect the fuel lines to the swirl pot, cut to length just as they emerge from the tunnel & metal insert where the jubilee clip clamps. Only fiddle was the inserts liked to drop out (of the black line) so had to ensure the clip had everything clamped in a horizontal position first.

Aligned all jubilee clips so I can get to them when the sides are enclosed and engine in & gave all the joints a good tug to check everything is tightened.

Red incoming, black return to the tank.

These were re routed a little higher later when the engine was in place to miss the bell housing: Fuel line run tidy up