Sunday 1 July 2012

Offside rear suspension complete

Offside rear

Shifted the car to the other side of the garage and completed the offside rear;
Hub nut torqued, disc, calliper & handbrake cable installed.

Rear brake 4-way relocated

With the brake 4-way mounted through the chassis hole its very tight against the handbrake lines - ok, but tight. I decided to drill another hole, use the supplied rivnut, and mount the 4-way slightly higher which leaves a little more space & much tidier arrangement. The rivnut gets very close to the chassis member behind & the top edge is governed by the boot floor height.




Next job is the flexible brake hose & underbody paint

Chassis number problem

Problem - I just noticed the chassis number plate GBS welded on for me has a letter missing - right from the middle making it only 16 letters... some how it will have to come off and get replaced.

No comments :

Post a Comment